Table of Contents
Advertisement
Then open the gripper.
Fig. 6: Opening the gripper
Push the connector housing further until the stuffer is positioned above
the next chamber to be terminated.
Repeat the described procedure until the connector is terminated completely.
©2009 Tyco Electronics Corporation, Harrisburg, PA
All International Rights Reserved
TE logo and Tyco Electronics are trademarks.
*Trademark. Other products, logos, and company names used are the property of their respective owners.
Hand tool for AMP DUOPLUG 2.5™
Do not tension the wires due to damaging the contacting!
12/ 17
Operation Manual
4-744015-6
Advertisement
Table of Contents
