Sony CMD-J7 Operating Instructions Manual page 55

The browser can be configured to access
WAP or HTML sites. The procedure to set up
the configuration depends on the server type.
See an example for WAP below.
1 Select WAP from the Main Menu. Then
select Settings.
2 Select the first field labeled Empty and
then select Edit.
3 Enter the Security Code (default 0000) at
the prompt (see also page 38).
4 Select Name to enter a name that will be
displayed for your site.
Name: My Provider
5 Select Home Page to enter the URL of the
home page specified by your Network
Operator/Service Provider.
Home Page: wap.myprovider.com
6 Select Server Type to select WAP or
HTML depending on which type of server
your provider has.
Server Type: WAP
7 Select Bearer Service to specify the
bearer type (Data or SMS) your Network
Operator/Service Provider requires.
Bearer Service: Data
8 Select Provider to set the following
parameters specified by your Network
Operator/Service Provider:
Dial Up Number: +12 345 67 890
(number to access the gateway)
ISP User Name: abc
ISP Password: sony
Data Call Type: Automatic
9 Select the arrow to return to the Edit
menu.
10 Select GW Server to enter the address of
the gateway server of your Network
Operator/Service Provider.
GW Server: 10.255.255.255
11 Select Security to choose On for a secure
connection to your gateway (GW port
9203) or Off for a non-secure connection
(GW port 9201) depending on your
Network Operator/Service Provider.
55 GB