Thermal Dissipation - Toa DA-1250D Operating Instructions Manual

Thermal Dissipation

Stack installation
To ensure the cooling environment, please meet the following condition
I R
T A
H O
To avoid heat protection
To prevent the hot air back to front air vent
Install exhaust blower
take the hot air away
H
Keep hot air will not flow
back to the front air vent
R
A I
T
O
In order to have a good heat
dissipation condition for amplifier,
please clean the filter after you finish
your install, because the dust in filter
will stop the air vent, it's not good for
the heat dissipation. And you should
clean the filter net every month.
The ambient temperature should
be lower than 35℃ while running
the amplifier
If use in Non-horizontal stack, we
suggest the rear exhaust outlet up
or straight to the vents of the room
Try your best to keep the temperature
under 35℃ even in extreme condition
7/10