Contents English; Important Notes - Bosch KMA 802 Repair Instructions

Contents English

1.

Important notes

2. Assembly and disassembly
3. Disassembly measuring cell carrier
4. Review of the various
models
5. Trouble shooting
6. Maintenance
6.1 Coil housing
6.2 Magnetic valve
6.3 Throttle valve
6.4 Valve manifold
6.5 Stabiliser unit
6.6 Quick release connection
6.7 Seals for the quick release connections
6.8 Flow measuring device
6.9 Control board
6.10 Gas spring
7. Functional tests
8. Converting the KMA
9. Diagrams
9.1 Hydraulic diagrams
9.2 Electrical circuit diagram
Robert Bosch GmbH
Important notes | KMA 802 / KMA 822 | 21
1. Important notes
21 Installation and/or repair work may only be performed
by trained and instructed Service personnel at Robert
22 Bosch GmbH or by organizations appointed to do such
work by Robert Bosch GmbH. If the devices are opened
23
or modified by unauthorized persons, then all warranty
claims will be rendered null and void.
23 Electrical systems and resources may only be put into
operation when in proper operating condition (for more
24 information, refer to Inspection and testing information
0108_084). This requirement is deemed to have been
26 fulfilled if after modification or repair (initial test) it has
26 been ascertained that requirements as specified by the
26 electrotechnical rules have been adhered to. To this
26 end, tests as under the type and scope of the measures
27 defined by the electrotechnical rules (e. in Germany
29 DGUV A3) are to be conducted. The type and scope of
29 tests are specified in VDE 0701/0702 Section 1 within
29 Germany. The relevant national specifications are to be
30 adhered to.
30
!
31 Observe ESD handling instructions when working
on the device when it is open. The instructions are
32 available in EDIS at 'BOSCH TEST EQUIPMENT\INS-
PECTION & TESTING A-Z\GENERAL NOTES\SAFETY'.
33
36
36
37
en
|
1 689 975 141 2017-09-19