Dual Monitor Setup; Enable The Citrix Ready Workspace Hub In Citrix Receiver - NComputing RX-HDX Installation And Configuration Manual

Dual monitor setup

In order to support dual monitors the NComputing Secondary Display Adapter (SDA) is required.
Please refer to the NComputing SDA setup
Enable the Citrix Ready workspace hub in
Citrix Receiver
The Citrix Ready workspace hub is disabled by default in Citrix Receiver for Android. To use the hub with
an Android device, use the following steps.
Device prerequisites:
•
Citrix Receiver for Android 3.13.5 or later installed
•
Bluetooth enabled (for proximity authentication)
•
Mobile device and workspace hub using the same wifi network
Proximity authentication provides a way to
authenticate users and launch a session
automatically.
To use proximity authentication enable Bluetooth
on the mobile device ensure that the "Add
account type as Web Interface" check box is not
selected when setting up the Citrix Receiver
account.
Citrix Ready workspace hub by NComputing (RX-HDX)
page for instructions.
6