About Citrix Ready Workspace Hub By Ncomputing; Setup With Internal Centralized Management; Configuration With No Centralized Management - NComputing RX-HDX Installation And Configuration Manual

Setup with internal centralized management

Citrix Ready workspace hub by NComputing (RX-HDX) comes with integrated enterprise-grade central
device management (NoTouch Center), providing a highly scalable, flexible and easy-to-use single
management point for RX-HDX devices.
Organize deployments in single or multiple sites with one software solution that simplifies management
tasks including firmware updates, configuration changes, device resets and more.
To access the latest NoTouch Center, please refer to the
To install NoTouch Center for the first time, please follow the procedures in
Appliance setup guide.
Alternatively, XenMobile (UEM) can be used to configure Citrix Ready workspace hub by NComputing. Please refer
to the later section for details.
Configuration with no centralized
management
1. Start the Citrix Ready workspace hub device.
2. Go to Start > Configuration.
The default password is "admin".
3. Go to Connections > Add.
4. Edit the new Connection and select Citrix/WorkspaceHub from Connection mode. Click Save.
5. At the top of the screen, click the Workspace Hub button.
6. Enter the desired URL for Workspace Hub Launcher (add http:// or https:// to the URL).
Note:
•
Enter any http URL you wish to be the default workspace hub display page. After the
comma you can add addition URL such as:
▪
This will give your workspace hub a random, yet attractive photo as the default
wallpaper.
Citrix Ready workspace hub by NComputing (RX-HDX)
https://source.unsplash.com/1920x1080/?nature
RX-HDX Getting Started
NComputing Virtual
Guide.
3