Turning Power On/Off; Startup Guide Application - Sharp LYNX 3D SH-03C Docomo Instruction Manual

Charging by using microUSB
cable for PC
When the FOMA terminal is turned on, you can
charge the FOMA terminal by connecting the
FOMA terminal to a PC with the microUSB cable for
PC (sample).
Install the USB driver to the PC in advance. And
also enable USB battery charge (nP. 63).
･ Refer to "Manual for USB Driver Installation" in
PDF format in http://galapagossquare.com/
?p=5208 (in Japanese only) for details on
installing USB driver.
For details on connecting to a PC nP. 104

Turning power on/off

Turning power on
■
1
H (for at least 2 seconds)
Turning power off
■
1
H (for at least 1 second)/[Power
off]/[OK]
Sleep mode
■
The screen is off and the sleep mode is activated
when H is pressed or the FOMA terminal is not
in use for a set length of time.
Press H in the sleep mode to deactivate the
sleep mode.
Touch panel lock
■
When the power is turned on or the sleep mode is
deactivated, the touch panel is locked.
Keep touching [J] and slide it right into [K] to
unlock.
32
Before Using the Handset
Key operation in touch panel unlock screen
To set/disable manner mode: y (for at least 1
second)
To illuminate Picture Light: G (for at least
1 second)
･ Press any key or touch [J] to turn off.
To turn off power: H (for at least 2 seconds)

Startup Guide application

Startup Guide is an application to support
beginners to learn operations or initial
settings.
Basic operation practice, basic setting, and
term dictionary are included.
1
In the application screen, [Startup
Guide]