Cleaning And Maintenance; Important Safety Instructions - TEFAL Quick & Hot BR 3038 Manual

Hide thumbs Also See for Quick & Hot BR 3038:

Manual (31 pages)

Table Of Contents

Table of Contents

Available languages

Enlarged version

• Place the appliance on a flat, stable, heat resistant surface away from water

- Do not fill the tank with

splashes and any sources of heat.

hot water, milk or any

1 – Put the appliance into the mains.

other liquid

2 After having removed the lid

- Make sure that no

(fig. 1a

foreign body such as

3 Put the tank back in place by pressing firmly and reposition the lid

grit or small particles

4 Place the desired container under the nozzle

gets into the water

5 Press "continuous water supply" button

tank: any damage

(fig. 3)

water

arising from foreign

Keep it held down until you get the amount of hot water you want. Hot

bodies having entered

water will stop running as soon as you release the button.

the tank is excluded

6 You can also use the automatic setting button with a pre-set quantity for

from the guarantee.

mugs. In this case, briefly press button

- Make sure that the

provide the quantity needed to fill a mug and stop automatically. If you

water is fresh so that it

wish, stop the water before the end of the cycle, then again press the same

has not had time to

automatic button

become stagnant or in

7 Models equipped with a quantity selector offer an additional function: you

contact with the air and

can adjust the amount of water automatically delivered to your container.

that it is odour free

To do this, select the chosen amount on the selector

- Never remove the tank

matic mug button

while the appliance is in

8 If you use small cups, we advise you to bring the cup in close to tap

operation.

avoid splashing.

- If you use an entire

tank of water all at once

(approximately

1.5 litres), let the

appliance rest for

10 minutes before

launching a new cycle

DESCALING your appliance

In order to optimise the lifetime of your appliance, we recommend that you descale it at least every 2 months.

Descaling should be carried out more frequently if you live in a very hard water area.

To de-scale:

(fig. 6)

1 Remove the Claris filter cartridge

2 Place a container with at least 1.5 litre under the spout.

3 Empty the tank

if it is is still full of water, then reposition it on its base

4 Pour 1 litre of commercially available white vinegar at 8° into the tank.

5 Press the continuous water supply button

(fig. 7)

10 seconds

6 The descaling cycle thus run automatically for approximately 10 minutes

7 When the cycle has come to an end, empty the container and refill the water tank to a maximum. Press the

"continuous water supply" button

to relaunch a new operation for rinsing the appliance

8 Once the last cycle has finished, reposition the Claris cartridge and your appliance will again be ready

(fig. 6)

Never use any other de-scaling method than that recommended.

SGETTING STARTED

, remove and fill the tank

and

E (fig. 8)

and you will instantly obtain hot

. The appliance will instantly

G (fig. 8)

, then press the auto-

; the water flow will stop automatically

(fig. 2)

and the mug pre-select button

simultaneously for at least

Do not immerse the

appliance in water

Do not put the appliance

with cold water

in the dishwasher

What to do if there is a PROBLEM

B (fig. 2)

Problems

Appliance makes a strange noise

Water flows too slowly or not at all

(fig. 9)

Water is cold

IF YOUR APPLIANCE IS DROPPED, HAS LEAKS OR IF THE POWER SUPPLY

CORD OR PLUG ARE VISIBLY DAMAGED

Return your appliance to your authorised Service Centre. See the warranty

conditions and the list of centres in the handbook provided with your

appliance.

The type and series number are shown on the base of your model.

This product has been designed for domestic use only. Any commercial use,

inappropriate use or failure to comply with the instructions, the manufacturer

accepts no responsibility and the guarantee will not apply.

• Carefully read the operating instructions before first use of the appliance and keep them in a safe place:

Tefal shall not be held responsible for incorrect use.

• Only connect the appliance to an earthed socket. Check that the power supply voltage shown on the

appliance's rating plate corresponds to that of your installation

• Take care not to place the appliance on a hot surface like a hot-plate or use it close to a naked flame.

• Immediately take the plug out from the mains if the appliance does not function correctly.

• Do not pull the power supply cable to remove the plug.

(fig. 3)

• Do not let the power supply cord hang down on the edge of a table or a work surface.

• Do not place your hand or the power supply cord on the hot parts of the appliance.

• Never soak the appliance, the cord or electrical plug in water or other liquid.

• Keep the appliance out of reach of children and certain disabled persons do not let the cord hang down.

• Do not use the appliance if the power supply cord or the appliance itself are damaged.

• To avoid any danger, do not use the appliance if the power supply cord or plug are damaged. It is

compulsory to have the power supply cord replaced by a TEFAL authorised centre.

• Always refer to the instructions to de-scale the appliance.