Product Description - TEFAL Quick & Hot BR 3038 Manual

Hide thumbs Also See for Quick & Hot BR 3038:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 8
Thank you for purchasing this Quick and Hot water urn. Please read the instructions common to all of
our models carefully and keep them in a safe place.

PRODUCT DESCRIPTION

A
water tank
B
tank lid
C
water release valve
D
body of the appliance
E
nozzle or water outlet
RINSING BEFORE USING FOR THE FIRST TIME
1 Remove all of the packaging, stickers and accessories from the interior and exterior of the appliance.
A
2 Remove tank
and clean it in water, taking care that no particles remain in the tank.
3 Then fill the tank A with cold water and reposition it firmly on its base D making sure that the release valve
(fig. 1a
1B
2)
C is properly engaged
,
and
.
4 Plug in the appliance to an electrical supply of the correct voltage.
5 Place a container that holds approximately 1.5 litre under tap
6 Press the continuous water supply button H: hot water will begin to run out
When operating for the first time, it is normal that a little steam escapes from nozzle
7 When the container is almost full, release the continuous water supply button
the water.
INSTALLING THE CLARIS FILTER CARTRIDGE
(according to models)
• We advise you to get the best taste and service lifetime of your appliance by using the Claris - Aqua Filter
System cartridge. This cartridge contains an anti-lime substance and activated carbon that reduces chlorine,
impurities, lead, copper, pesticides, etc. that are present in water. Minerals and trace elements, however, are
preserved.
J
1 Unwrap cartridge
. Take note of the month in which the cartridge is put in use by sliding the upper ring of
(fig. 4)
the filter to the use start date
. You should change your Claris Filter Cartridge every 4 to 6 weeks
(or every 50 litres), according to the hardness of your water.
K
Certain models also have an indicator light
K
For these models, when this light
flashes during use, it is time to change the cartridge
A
2 Position the cartridge in tank
and screw the cartridge
3 To replace the cartridge, remove the used cartridge and fit a new Claris Aquafilter system cartridge sold as
(fig. 6)
an accessory (Ref. XH 5000)
.
4 For models with an indicator light, it is necessary to record the change of the cartridge by simultaneously
pressing the "continuous water supply" button and the mug pre-select button
After 5 seconds, the indicator light will go out. The appliance will then have recorded the cartridge change.
• The Claris AquaFilter cartridge can be installed in all Tefal water urns, including those that did not have it
on purchase.
(fig. 1)
G
automatic mug button for pre-setting
quantity
H
manual "continuous water supply" button
I
water volume selector (according to model)
J
filter cartridge (according to model)
K
ON/OFF and filter cartridge change light
(according to model)
E
(fig. 3)
.
E
.
H
to stop the flow. Discard
which indicates when it is necessary to change the cartridge.
(fig. 5)
J
a quarter turn into the bottom of the tank.
G
for 5 seconds
GB
.
(fig. 7)
.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents