Disassembly Instructions; Removal Of Mechanical Parts And P.c. Boards - Sanyo DP26670 Service Manual

1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
CAUTION
Be careful not to remove the LVDS cable forcibly, because
the LVDS cable may be damaged.
1-1: STAND ASS'Y (Refer to Fig. 1-1)
1. Remove the 2 screws (1).
2. Remove the Stand Ass'y in the direction of arrow.
1-2: COVER INVERTER and COVER LVDS
(Refer to Fig. 1-2)
1. Remove the screw (1).
2. Remove the Cover Inverter in the direction of arrow (A)
3. Disconnect the following connector: (CP3906).
4. Remove the screw (2).
5. Remove the Cover LVDS in the direction of arrow (B)
6. Disconnect the following connector: (CP2804).
Cover LVDS
(B)

DISASSEMBLY INSTRUCTIONS

(1)
(1)
Stand Ass'y
Fig. 1-1 Fig. 1-1
(2)
(1)
Cover Inverter
(A)
Fig. 1-2
1-3: BACK CABINET ASS'Y (Refer to Fig. 1-3)
1. Remove the 9 screws (1)
2. Remove the Back Cabinet Ass'y in the direction of arrow.
(1)
(1)
1-4: LCD BLOCK (Refer to Fig. 1-4)
1. Remove the 2 screws (1).
2. Remove the 3 screws (2).
3. Remove the Angle-Hinge in the direction of arrow (A)
4. Remove the LCD Block in the direction of arrow (B).
B1-1 B1-1
(1)
(1)
(1)
(1)
(1)
(1)
Angle Hinge
(1)
(2)
(2)
(A)
LCD Block
(B)
(1)
Fig. 1-3
(2)
(1)
Fig. 1-4