Installing The Software Onto Your Computer; Before Installing The Software - Sony MZ-N510CK Notes on installing & operating OpenMG Operating Instructions Manual

Installing the software onto your computer

This section explains the installation of the SonicStage Ver.1.5 software supplied with your
Net MD.

Before installing the software

1 Make sure to note the following before installing the software.
Do not connect the dedicated USB cable before the installation!
The SonicStage software may not correctly load or operate if the dedicated USB
cable is connected to your computer during the installation.
Close all other Windows applications before starting the installation!
Make sure to close any virus-check software, as such software usually demand large
amounts of system resources.
2 Depending on the following operating system or software already installed
on your computer, refer to the reference pages before installing the
software.
Windows XP
Windows Millennium Edition
Windows 2000
OpenMG Jukebox,
SonicStage, or SonicStage
Premium
76
, page 90
, page 91
, page 91
, page 92
• To install this software, you must log on with a
user name with "Computer Administrator".
• If you perform the "System Restore" function in
the Windows "System Tools" menu, the tracks
managed by SonicStage may become corrupted
and rendered unplayable.
• If you perform the "System Restore" function of
the Windows "System Tools" menu, the tracks
managed by SonicStage may become corrupted
and rendered unplayable.
• You must log on as "Administrator" before
installing the software.
• Depending on the version of your software, the
existing software may be overwritten by the new
version or it may co-exist with SonicStage
Ver.1.5. As the installation process will depend
on the version, see the reference page for details.