Advertisement
RIBBON COVER -- TWO-COLOR RIBBON MACHINE
PLACE THE RIBBON CONTROL LEVER H- 20-5905 INDICATOR IN STENCIL POSITION.
STUD "A "
ON RIBBON UNIVERSAL BAR LINK OPERATES IN THE CUT OUT OF RIBBON CONTROL ARM "g" H-20-6925,
IF STUD "a" is not OPERATING IN THE CUT OUT, THE ADJUSTMENT IS MADE BY FORMING THE RIBBON
CONTROL INTERMEDIATE LEVER H-20-6900 AT,POINT "b".
LOOSEN RIBBON CONTROL ARM MOUNTING SCREW "f".
HAVE RIBBON VIBRATOR AT ITS LOWEST
POINT, POSITION RIBBON CONTROL ARM "g" H- 20-6925 TO LIGHTLY REST AGAINST "a".
TIGHTEN RIBBON CONTROL ARM MOUNTING SCREW "f".
POSITION RIBBON
SELECTOR TO BLACK.
DEPRESS A KEYLEVER AND HOLD TYPE BAR AGAINST
PLATEN.
FORM "e" TO CLEAR PO
MUST CLEAR POINT "c" BY .GIG.
H-20-6900
i;^
o
©
O
RIBBON COVER
o
H-20- 6905
RIBBON COVER -- SINGLE COLOR RIBBON MACHINE
LOOSEN RIBBON CONTROL ARM H-2G-6925, SET SCREW H-2G-5112.
RIBBON UNIVERSAL BAR
H-2G-6335 IS HELD AGAINST KEYLEVERS BY RIBBON UNIVERSAL BAR RESTORING SPRING H-2G-5624,
HOLD RIBBON VIBRATOR H-2G-6912 DOWN.
TI GHTEN RIBBON CONTROL ARM SET SCREW H-2G-5112.
SPACE BAR
ADJUST SPACE LEVER PIVOT SCREWS H-2G-52G2 TO REMOVE END PLAY AND TO CENTER SPACE
LEVER H-2G-6415 IN KEY LEVER FRONT COMB H-2G-6G16.
ADJUST SPACE BAR TRIP TO TAKE PLACE WHEN SPACE BAR IS I/I6 OF AN INCH ABOVE DOWN STOPS
BY FORMING SPACE LEVER.
PLACE PLIERS JUST TO THE LEFT OF LEFT SPACE KEY EXTENSION.
FORM TO THE REAR OF MACHINE FOR EARLIER TRIP, TO THE FRONT FOR A LATER TRIP.
SPACE BAR CONNECyiNG LINK H-2G-592G MAY BE FORMED TO GAIN CORRECT TRIP.
MUST BE TAKEN TO PREVENT BINDING OF LINK H-2G-592G.
EXTREME CARE
Advertisement
