Advertisement
ASSEMBLE ESCAPEMENT ROCKER SHAFT TO ESCAPEMENT ROCKER BRACKET, REMOVE SHAFT END
PLAY WITH ESCAPEMENT ROCKER SHAFT PIVOT SCREW RIGHT H-20-5295.
INSTALL SPACE BAR CONNECTING LINK H-20-592P TO THE SPACE LEVER H-20-6415.
NOTE:
IF LEFT ESCAPEMENT SHAFT PIVOT SCREW H- 20-5295 HAS BEEN DISTURBED
ADJUST SCREW SO ABOUT TWO THREADS OF SCREW ARE SHOWING TO THE RIGHT OF THE
BRACKET H-2Q-7101 .
TIGHTEN LOCK NUT H-20-5342.
INSERT ESCAPEMENT ARM SCREW H-20-5287 THRU REAR END OF SPACE BAR CONNECTING LINK
H-20-5292, INSTALL SPACER H-20-5401 , CONTINUE SCREW THRU ESCAPEMENT OPERATING
LEVER H-20-7145.
INSTALL SPACER H-20-5401 ON SCREW, POSITION UNIVERSAL BAR FORK OVER
SCREW, INSTALL ESCAPEMENT ARM NU T , H - 2 O-5 34 9 .
HOLD ESCAPEMENT WHEEL SO TOOTH OF WHEEL IS AGAINST LIP "A OF ESCAPEMENT WHEEL PAWL.
PLACE A .020 FEELER GAUGE AGAINST ESCAPEMENT WHEEL TOOTH "c", POSITION ESCAPEMENT
ROCKER SO LOOSE DOG
SCREWS
H-20-5112.
IS AGAINST FEELER GAUGE, TIGHTEN ESCAPEMENT ROCKER MOUNTING
O
O
O
o
5?
O
O
o
o
(TOP VIEW)
I
I
ESCAPEMENT ROCKER SETTING
.020
REMOVE ESCAPEMENT SHAFT MOUNTING SCREW RIGHT H-20-5295 AND ESCAPEMENT SHAFT
ASSEMBLED.
MOUNT ESCAPEMENT ROCKER BRACKET H-20-7101 TO BOTTOM OF CARRIAGE FRONT RAIL H-20-7201
WITH ESCAPEMENT ROCKER BRACKET MOUNTING SCREWSH-20-5119 AND WASHERS H-20-5401.
REMOVE END PLAY OF RIBBON CARRIER SHAFT H-20-691 9 WITH SCREW H-20-5295 AND LOCK IN
PLACE WITH NUT H-20-5342.
INSTALL ESCAPEMENT SHAFT ASSEMBLED AND ADJUST.
OPERATE ESCAPEMENT MANUALLY, CHECK ESCAPEMENT "DROP".
IT SHOULD BE l/3 - 2/3 SPACE,
IF THERE IS MORE THAN l/3 SPACE "DROP" ON THE FIRST TRIP, MOVE ESCAPEMENT ROCKER
H-20-7155 TO THE LEFT AND VICE VERSA.
Advertisement
