Editing Recorded Tracks; Before Editing; Labeling Recordings (Name); Labeling - Sony Walkman MZ-N510 Operating Instructions Manual

Editing recorded tracks

Before editing

You can edit your recordings by adding/
erasing track marks or labeling tracks and
MDs.
Notes
• Premastered MDs cannot be edited.
• Close the record-protect tab on the side of the
MD before editing.
• The recorder is recording editing results while
"TOC Edit" is flashing in the display.
— Do not move or jog the recorder.
— Do not disconnect the power source.
— The lid does not open.
Labeling recordings
(Name)
You can name tracks and discs using the
recorder's character palette.
Note
When you label a group, see page 43.
Available characters
• Capital and small letters of the English
alphabet
• Numbers 0 to 9
• ! " # $ % & ( ) * . ; < = > ?
@ _ ` + – ' , / : _ (space)
Maximum number of
characters per name
Track names, group names, and disc
name: Approx. 200 each (containing a
mixture of all available characters)
Maximum number of
characters that can be input
per disc
Alphanumeric characters and symbols
only: Approx. 120 titles of about 10
characters each (a maximum of about
1,700 characters)
The number of titles that can be stored on
a disc depends on the number of
characters that are input for track names,
group names, and disc name.
Note
If you enter the symbol "//" between the
characters in disc names such as "abc//def", you
may be unable to use the group function.
END SEARCH
MENU
4-way control key
(ENTER • N, ., >, x)

Labeling

You can label a track and a disc while the
recorder is stopped, recording, or playing.
Note that if you lable a track while the
recorder is stopped, the track must be the
currently selected.
For labeling a group, see "Labeling
recorded groups" (page 43).
1
Press MENU.
2
Press . or > repeatedly until
"EDIT" appears in the display, and
then press ENTER.
3
Press . or > repeatedly until
"Name" appears in the display, and
then press ENTER.
X
continued
33