Connecting The Md Walkman To Your Computer - Sony Walkman MZ-N420D Operating Instructions Manual

Connecting the MD Walkman to your computer

After the software installation is completed, connect the MD Walkman to your computer.
1
Insert a recordable disc into the MD Walkman.
2
Insert the new dry battery into the MD Walkman, and connect the MD
Walkman to the computer using the supplied dedicated USB cable.
Insert the new
dry battery
To the USB jack/ dedicated jack
3
Check the connections.
When the connections have been properly made, "PCppMD"* appears in the display
of the MD Walkman.
Depending on the MD Walkman, "Net MD" may be displayed.
Note
When using the MD Walkman connected to your computer, it is recommended that you use a new dry
cell battery. We do not assure the results should there be a mis-operation, transferring failure, or
destruction of audio data caused by insufficient battery power.
36
MD Walkman
Dedicated USB cable
To the USB
connecting terminal
Computer