Specifications; Important Safety Instructions - Makita BML800 Instruction Manual

ENGLISH (Original instructions)
1. Battery cover
2. Red indicator
3. Button
4. Battery holder

SPECIFICATIONS

Operating time
Dimensions
Degree of protection against
water
IMPORTANT SAFETY
INSTRUCTIONS
WARNING:
When using electric tools, basic safety precautions should
always be followed to reduce the risk of fire, electric
shock, and personal injury, including the following:
READ ALL INSTRUCTIONS.
1. Before using battery cartridge, read all instructions
and cautionary markings on (1) battery charger, (2)
battery, and (3) product using battery.
2. Do not use the tool in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust.
3. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
4. Use electric tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
5. Use a power source with the voltage specified on the
nameplate of the charger.
6. Do not attempt to use a step-up transformer, an
engine generator or DC power receptacle.
7. Charge the battery cartridge with room temperature at
10°C - 40°C (50°F - 104°F).
8. When battery pack is not in use, keep it away from
other metal objects like: paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another.
6
Explanation of general view
5. Battery
6. Switch
7. Flash light
8. Head band
Model
Voltage
LED
Flash light
Battery holder
Net weight
Flash light
Battery holder and battery
9. Band clips
10. Belt hook
11. Belt
12. Front hook
BML800
14.4 V / 18 V d.c.
Approx. 7.5 hours (BL1415)
Approx. 17.0 hours (BL1430)
Approx. 8.5 hours (BL1815)
Approx. 20.0 hours (BL1830)
ø55 mm X 55 mm
151 mm X 76 mm X 88 mm (with battery BL1830)
0.58 kg (with battery BL1415)
0.77 kg (with battery BL1430)
0.64 kg (with battery BL1815)
0.86 kg (with battery BL1830)
Not protected
Shorting the battery terminals together may cause
sparks, burns, or a fire.
9. After charging or before attempting any maintenance
or cleaning, unplug the charger from the power
source.
10. This battery holder part is not waterproof. Do not use it
in damp or wet locations. Do not expose it to rain or
snow. Do not wash it in water.
11. Do not touch the inside of the flashlight head with
tweezers, metal tools, etc.
12. Under abusive conditions, liquid may be ejected from
the battery, avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
13. Do not short the battery cartridge:
(1) Do not touch the terminals with any conductive
material.
(2) Avoid storing battery cartridge in a container with
other metal objects such as nails, coins, etc.
(3) Do not expose battery cartridge to water or rain.
A battery short can cause a large current flow,
overheating, possible burns and even a breakdown.
14. If electrolyte gets into your eyes, rinse them out with
clear water and seek medical attention right away. It
may result in loss of your eyesight.
15. If operating time has become excessively shorter, stop
operating immediately. It may result in a risk of
overheating, possible burns and even an explosion.
16. Be careful not to drop or strike battery.
17. Do not incinerate the battery cartridge even if it is
severely damaged or is completely worn out. The
battery cartridge can explode in a fire.
1.6 W
IPX4