Advertisement
Quick Links
General Description
The Shure Centraverse CVG is a professional gooseneck electret condenser
microphone for use in general installed sound reinforcement applications.
With dual gooseneck sections for full articulation, the CVG12/18 provides
scalable, best-in-class performance in a wide variety of locations, including
podiums and desktops.
Features
•
Cardioid polar pattern with tailored response for speech
•
Dual-section gooseneck enables ease of positioning and placement op-
tions
•
Three model variations with inline preamps: standard, mute switch, and
light ring indicator
•
Available in 12" (30.4 cm) and 18" (45.7 cm) gooseneck lengths
•
Commshield technology guards against unwanted RF interference from
portable wireless devices (smartphones, etc.)
•
Included flange mount and snap-fit windscreen
Installation
1. Drill a 22 mm (7/8 in.) hole in the mounting surface for the flange and three additional holes for the screws.
2. Screw the flange into place, and then set the microphone into the center hole.
3. Connect the microphone to a mixer or P.A. system using an XLR cable.
Note: This microphone requires +48V phantom power to operate.
Mute Button Operation
Press the button on the microphone body to turn the mute on/off. The standard
model does not feature a mute button.
1. CVG12S: Mute is indicated by an LED on the microphone body:
⁃
Green = Microphone is on
⁃
Red = Microphone is muted
©2017 Shure Incorporated
22 mm
(7/8 in.)
Gooseneck Condenser Microphone
Model Variations
Gooseneck Length
12: 12" gooseneck
18: 18" gooseneck
Mute Button and LED Indicator*
S: Includes mute button and bi-color LED on microphone body
RS: Includes mute button and On/Off colored indicator ring
*The Standard model does not feature a mute switch or LED
Color
B: Black
Polar Pattern
C: Cardioid
Note: Model availability depends on region. See your local Shure dealer or
distributor for details.
2. CVG12RS: Mute is indicated by a light ring on the microphone head:
⁃
Red = Microphone is on
⁃
Off = Microphone is muted
CVG
1/4
Advertisement
Related Manuals for Shure CVG Series
Summary of Contents for Shure CVG Series
-
Page 1: General Description
• Included flange mount and snap-fit windscreen C: Cardioid Note: Model availability depends on region. See your local Shure dealer or distributor for details. Installation 1. Drill a 22 mm (7/8 in.) hole in the mounting surface for the flange and three additional holes for the screws. -
Page 2: Specifications
Gooseneck Condenser Microphone Shure Incorporated Guidelines For Use 1. Maintain a distance of approximately 15 - 30 cm (6 - 12 in.) between the sound source and the microphone. 2. Always use the supplied windscreen to control plosives and wind noise. - Page 3 Gooseneck Condenser Microphone Shure Incorporated Dynamic Range 93 dB Self Noise equivalent SPL, A-weighted, typical 27 dBSPL Preamplifier Output Clipping Level at 1 kHz,at 1% THD –7 dBV Common Mode Rejection 10 Hz to 100 kHz >45 dB Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3...
- Page 4 Shure Europe GmbH Headquarters Europe, Middle East & Africa Department: EMEA Approval Jakob-Dieffenbacher-Str. 12 75031 Eppingen, Germany Phone: +49-7262-92 49 0 Fax: +49-7262-92 49 11 4 Email: info@shure.de Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Phone: +1-847-600-2000 Email: info@shure.com...