Sony DVP-LS500 Operating Instructions Manual page 18

When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen. If you want to change the aspect
ratio, please refer to page 64.
Notes
• Do not connect a VCR, etc. between your TV and the player. If you pass the player signals via the VCR,
you may not receive a clear image on the TV screen. If your TV has only one audio/video input jack,
connect the player to this jack.
• When you connect the player to your TV via the SCART (EURO AV) jacks, the TV's input source is set
to the player automatically when you start playback. In this case, press t (TV/video) on the remote to
return the input to the TV.
When you play a disc recorded in the NTSC colour system, the player outputs the video
signal or the Setup Display etc. in the NTSC colour system and the picture may not appear
on the PAL colour system televisions. In this case, open the tray and remove the disc.
18
CD/DVD player
VCR
TV
Connect
directly