Appendix A - Benchmark PulsaCoil A-Class 145 Design, Installation And Servicing Instructions

A mains pressure hot water supply system incorporating an off peak electric thermal store
Hide thumbs Also See for PulsaCoil A-Class 145:
Table of Contents

Advertisement

WATER SAVINGS
WATER RELATED COSTS CAN BE REDUCED BY GOOD
PLUMBING PRACTICE.
TAPS & MIXERS
2 TAP
HALF OPEN
OVER
20 L/M
Unregulated
SHOWERS
Unregulated
Vast quantities of water are needlessly run off to waste due to
Taps, Mixers and Showers discharging flow rates far in excess
of the rates required for them to perform their duties.
The contrasting flow rates shown on this leaflet clearly illustrate
the savings that can be made whilst still providing a good
performance.
British made Aquaflow Regulators provide constant flow rates
by automatically compensating for supply pressure changes
between 1 bar & 10 bars.
To facilitate installation into the wide range of plumbing
equipment which isencountered in the U.K,FourFixing Options
are available:-
OPTIONS FOR SHOWERS
1. MXF "DW" Range - For fitting behind Fixed Shower Heads
or onto Flexible Hoses for Handshowers (preferably onto the
inlet end when lightweight hoses are used).
2. Compression Fitting Range. "In Line" regulators as in
Option 4 for Taps & Mixers.
Information by courtesy of
AQUAFLOW REGULATORS LTD
Haywood House, 40 New Road, Stourbridge, West Midlands DY8 1PA
TELEPHONE (01384) 442611 FAX: (01384) 442612
Fitted with regulator
Regulated
10 - 12 l/m
25 - 30 l/m
1
5, 6 OR
8 L/M
2
4 FIXING OPTIONS FOR TAPS &
MIXERS
1. MK Range - Combined Regulators & Aerator
for screwing onto Taps & Mixers with internal
or external threads on their noses. Anti Vandal
models also available.
2. MR05-T Range - Internal Regulators. Push-fit
into Tap or Mixer seats. Produced in three
sizes - 12.5mm (BS1010), 12mm & 10mm,
Flangeless
with Low Lift washers.
3. MXF Standard Range - Screw on tail
models for Taps & Mixers. Fix onto the tails
before fitting the tap connectors. Available in
3/8", 1/2", 3/4" and 1" BSP.
4. CompressionFitting Range-"In Line" regulators
housed in 15mm & 22mm CXC Couplers &
Isolating Valves. " "UK WFBS listed by the Water
Research Centre. Isolation valves available for
slotted screwdriver operation or with coloured
plastic handles. Now available also in plastic
bodied push-fit couplers & valves.
3
Page 25

APPENDIX A

1
2
models also available for Taps
1
3
4
1
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents