Preparing A Power Source (Rechargeable Battery) - Sony CD Walkman D-NE920 Operating Instructions Manual

Preparing a Power
Source
(Rechargeable
Battery)
Charge the rechargeable battery before using
it for the first time or when it is depleted.
To maintain the original battery capacity
longer, charge the battery only when it is
completely depleted ("Lo Batt" appears on
the display).
Since the supplied charging stand is for this
player only, you cannot charge any other
model using this stand.
1
Squeeze the OPEN switch from both
sides to open the lid of your player.
2
Open the battery compartment lid
inside the player.
Battery
compart-
ment lid
3
Insert the NH-14WM rechargeable
battery (supplied) by matching the
 to the diagram in the battery
compartment and close the lid until
it clicks into place.
OPEN switch
Raise
Press
Insert the

end first.
4
Connect the AC power adaptor to
the supplied charging stand. Then
insert the player into the charging
stand.
The OPR lamp on the CD player flashes,
then lights up. On the display of the
CD player, "Charging" flashes, and the
indicator sections of
up in succession as charging progresses.
When the remote is connected,
"Charging" flashes and the indicator
sections of (battery) light up in
succession in the remote display.
to an AC outlet
AC power adaptor
to DC
IN 3V
When the battery is completely charged,
the OPR lamp goes off and "Charging"
disappears.
(battery) light
OPR lamp
Charging
stand
Terminals
Continued 
11