Table of Contents
Advertisement
●Be careful not to pinch the rubber seal when
closing the back cover. Trying to close the
cover with a seal pinched can scratch the
seal and affect water resistance. Any minute
particles becoming lodged between contact
surfaces (a single hair, etc.), no matter how
small, can cause seepage.
●Any liquid other than water (alcohol, etc.) on
the product can affect product durability.
●Do not insert pointed objects in the back
cover. Doing so may damage/deform the
product or scratch the seal, allowing water
seepage.
●Parts used for maintaining water resistance
should be replaced every 2 years regardless
of their appearance. Contact your nearest au
shop for replacement.
■Heat resistance
●Do not submerge the product in hot water or
get it wet with hot water. Do not use the
product in saunas or expose it to hot air from
hair dryer, etc. The product is not designed to
be heat resistant.
40
■Shock
●The product shock resistance assumes
usage in daily situations; subjecting the
product to excessive shock such as by
throwing or causing/letting the product fall
forcefully may break the product.
Advertisement
Table of Contents
