Evolution Aqua Varipump 10000 Instruction Manual page 8

CLEANING THE VARIPUMP
Step 1: Hold pump by the handle and remove the inlet strainer basket
Step 2: Using a Phillips screwdriver, undo the four screws at the base of the pump body
Step 3: Remove the volute
Step 4: Clean any debris and algae from inside the volute using a brush
Step 5: Pull the impeller out of the housing by hand
Step 6: Clean the impeller with a bush. Handle carefully to avoid damage
Step 7: Clean inside the impeller housing with a brush
Step 8: Replace the screws and inlet strainer basket
8