Advertisement
INSTALLING THE VARIPUMP - PUMP FED
Varipump can be submersed in water, as part of a pump fed system. When installing
on pump fed systems ensure we recommend using the hosetails provided to connect
up to flexible hose (not supplied).
1. Flexible hose (not supplied) should be the widest possible diameter.
2. Extra steps on hosetails should always be sawn off and removed.
3. A hoseclip (not supplied) must always be used to hold the hose in place on
the hosetail.
4. Ensure sealing rings are fitted properly.
5. All wiring (electrical) work must be carried out by qualified electricians and must be
installed in accordance to the local codes, see information on page 2.
6. The motor must be earthed.
7. Do not let the pump run dry.
8. The controller must not be submerged in water.
Pump fed filter installation example shown below
POND
6
Return to pond
4" Pipe
Hose
UV
Advertisement
