SCHUBERTH SC1 User Manual page 38

SC1
14.2.8 HD Intercom (Default: Enable)
HD Intercom enhances the two-way intercom audio from normal quality
to HD quality. HD Intercom will become temporarily disabled when you
enter into a multi-way intercom. If this feature is disabled, the two-way
intercom audio will change to normal quality.
Note:
1. The intercom distance of HD Intercom is relatively shorter than that of normal
intercom.
2. HD intercom is active only when Audio Multitasking is disabled.
14.2.9 VOX Sensitivity (Default: Medium)
The sensitivity can be adjusted depending on your riding environment.
14.2.10 Voice Prompts (Default: Enable)
You can disable voice prompts by software configuration settings, but
the following voice prompts are always on.
- Headset configuration settings menu, battery level indicator,
speed dial, FM radio functions
38
14.2.11 RDS AF Setting (Default: Disable) (SC1 Advanced only)
Radio Data System (RDS) Alternative Frequency (AF) Setting
allows a receiver to re-tune to the second frequency location when the
first signal becomes too weak. With RDS AF enabled on the receiver, a
radio station with more than one frequency can be used.
14.2.12 FM Station Guide (Default: Enable) (SC1 Advanced only)
When FM Station Guide is enabled, FM station frequencies are given by
voice prompts as you select preset stations. When FM Station Guide is
disabled, the voice prompts on FM station frequencies will not be given
as you select preset stations.
14.2.13 Advanced Noise Control™ (Default: Enable)
When Advanced Noise Control is enabled, the background noise is
reduced during an intercom conversation. When it is disabled, the
background noise is mixed with your voice during intercom.