Universal Intercom Pairing - SCHUBERTH SC1 User Manual

SC1
1. If a non-Sena headset does not support a multipoint connection,
it cannot use a phone call connection while using the Universal
Intercom.
2. As for Sena headsets, the Universal Intercom affects the multipoint
connection.
3. If non-Sena headset (already paired as Universal Intercom with
Sena) is turned on, then the multipoint connection is automatically
deactivated. And the non-Sena headset is automatically connected
to Sena headset as a Universal Intercom. So you cannot use
multipoint connection devices such as GPS, while a non-Sena
headset is turned on.
4. Even though you disconnect the non-Sena headset as a Universal
Intercom, it will not automatically restore the multipoint connection.
To restore the multipoint connection, you should turn off the
non-Sena headset first, then try to connect to multipoint device
manually from the device screen or simply reboot the device so that
it automatically connects to the Sena headset.
26
11.1

Universal Intercom Pairing

The SC1 can be paired with non-Sena Bluetooth headsets for Bluetooth
intercom conversation. You can pair the SC1 with only one non-Sena
Bluetooth headset so if you pair with a different non-Sena Bluetooth
headset, the previous pairing will be removed.
1. Turn on the SC1 and a non-Sena Bluetooth headset that you want
to pair with.
2. Press and hold the (+) Button or the (-) Button for 10 seconds to
enter the configuration menu. Tap the (+) Button until you hear a
voice prompt, "Universal intercom pairing". Tap the (-) Button
to enter into Universal Intercom Pairing mode and the blue LED will
flash rapidly and you will hear multiple beeps. Please refer to section
14.1.9, "Universal Intercom Pairing" for more details.
3. Perform the operation required for handsfree pairing on the
non-Sena Bluetooth headset (refer to the User's Manual for the
headsets you want to use). The SC1 will automatically pair with a
non-Sena Bluetooth headset when each are in pairing mode.