Smarteh LONGO LPC-2 User Manual
Programmable controller, wireless temperature control panel
Hide thumbs
Also See for LONGO LPC-2:
- User manual (14 pages) ,
- User manual (18 pages) ,
- User manual (15 pages)
Subscribe to Our Youtube Channel
Related Manuals for Smarteh LONGO LPC-2
Summary of Contents for Smarteh LONGO LPC-2
- Page 1 USER MANUAL Longo programmable controller LPC-2.WP1H Wireless Temperature Control panel Version 4 SMARTEH d.o.o. / Poljubinj 114 / 5220 Tolmin / Slovenia / Tel.: +386(0)5 388 44 00 / e-mail: info@smarteh.si / www.smarteh.si...
- Page 2 Longo programmable controller LPC-2.WP1H Written by SMARTEH d.o.o. Copyright © 2017, SMARTEH d.o.o. User Manual Document Version: 4 January, 2017...
- Page 3 24 months is valid from the date of sale to the end buyer, but not more than 36 months after delivery from Smarteh. In case of claims within warranty time, which are based on material malfunctions the producer offers free replacement. The method of return of malfunctioned module, together with description, can be arranged with our authorized representative.
-
Page 4: Table Of Contents
Longo programmable controller LPC-2.WP1H Longo programmable controller LPC-2.WP1H 1 ABBREVIATIONS................1 2 DESCRIPTION...................2 3 FEATURES..................3 4 OPERATION..................4 4.1 Operational modes..............4 4.2 Parameters................4 5 INSTALLATION..................8 5.1 Connection scheme..............8 5.2 Service mode................10 5.3 Mounting frame selection............11 5.4 Mounting instructions..............12 5.5 Module labeling...............13 6 TECHNICAL SPECIFICATIONS..............14 7 SPARE PARTS..................15 8 CHANGES ..................16 9 NOTES..................17... -
Page 5: Abbreviations
Longo programmable controller LPC-2.WP1H 1 ABBREVIATIONS Push button Liquid crystal display Dual in-line package Set point WM-BUS Wireless M-Bus... -
Page 6: Description
Longo programmable controller LPC-2.WP1H 2 DESCRIPTION LPC-2.WP1H wireless panel is used for room temperature monitoring, regulation for systems with fan speed control (fan-coil,...). Panel is equipped with temperature, relative humidity and light intensity sensor and four push buttons (PB). Data are displayed on low power monochromatic LCD. To increase/decrease temperature set point (SP) warmer, cooler PB should be pressed respectively. -
Page 7: Features
Longo programmable controller LPC-2.WP1H 3 FEATURES Figure 1: LPC-2.WP1H wireless temperature control panel. Table 1: Features Wireless temperature and humidity measurement 2 push buttons for temperature set point 2 push buttons for fan speeds – manual, auto, off 10 position LCD bar-graph for temperature set point 4 position LCD bar-graph for manual fan speeds, auto and controller off Light intensity measurement for smart LCD on/off regulation Step-less or 3 step fan motor controlling... -
Page 8: Operation
Tester. This is done by setting Service mode to "0" in RAM2. Service mode is enabled for 3 sec. after power up. If service mode is not triggered using Smarteh LPC Tester, then wireless panel will start in normal mode. - Page 9 Longo programmable controller LPC-2.WP1H Remote temperature [oTRem]: Temperature value used instead of iTAct, if value is different than 0. Type: WORD → Raw to engineering data: 0 .. 10000 0.00 °C .. 100.00 °C Fan Local/Remote command [oFanRem]: When this command changes to active, Fan mode on wireless panel will be changed in increment-rotate way [->Off, I., II., III., auto, ->].
- Page 10 Longo programmable controller LPC-2.WP1H Local/Remote command [oRem]: When “0”, Local mode is selected. In this mode wireless uses set point set by TB. In remote mode, “1”, WP uses set point received from other devices (HMI, Touch Panel, OT1,..) through communication channel. Type: BOOL →...
- Page 11 Longo programmable controller LPC-2.WP1H Act. Room temp. [iTAct]: Actual room temperature measured by wireless panel. Type: WORD → Raw to engineering data: 0 .. 10000 0.00 °C .. 100.00 °C Act. Room RH. [iRHAct]: Room humidity measured by wireless panel. Type: WORD →...
-
Page 12: Installation
Longo programmable controller LPC-2.WP1H 5 INSTALLATION 5.1 Connection scheme Figure 2: Connection scheme to main module... - Page 13 Longo programmable controller LPC-2.WP1H Table 2: K1 K1.1 Ground K1.2 7 .. 16 V DC Power supply input K1.3 RS-232 Rx Data receive line K1.4 RS-232 Tx Data transmit line Table 3: LCD screen symbols & Buttons Active LCD bar presents actual set point relative to range Bar 1 LCD Temp.
-
Page 14: Service Mode
Longo programmable controller LPC-2.WP1H 5.2 Service mode In service mode LPC-2.WP1H is connected to PC via Smarteh LSA-2.USB adapter. Connection between LPC-2.WP1H and LSA-2.USB is made with SMB programming cable which is connected to K1 connector on LPC-2.WP1H and RS-232 port on LSA-2 USB adapter. Service mode must only be... -
Page 15: Mounting Frame Selection
Longo programmable controller LPC-2.WP1H 5.3 Mounting frame selection Wireless panel casing is designed to be used as remotely panel allowing users to move it or use it as a wall mounted panel on fixed place. Wall mounting procedure: Cut off circular shape at the back of the case with the knife cutter, •... -
Page 16: Mounting Instructions
Longo programmable controller LPC-2.WP1H 5.4 Mounting instructions Figure 4: Housing dimensions Dimensions in milimeters. All connections, panel attachments and assembling must be done while panel is not powered. Panel should be positioned in the wall inside of the room. Avoid direct sunlight or positioning near heating/cooling source object. -
Page 17: Module Labeling
Label 2 descriptions: 1. S/N: WP1-S9-1500000003 is the serial number. WP1 – short product name, • S9 – user code (test procedure, e.g. Smarteh person xxx), • 1000000003 – year and current stack code, • 10 – year (last two cyphers), •... -
Page 18: Technical Specifications
Longo programmable controller LPC-2.WP1H 6 TECHNICAL SPECIFICATIONS Table 6: Technical specifications Power supply 2pcs. AA (LR6) battery Battery lifetime Approximately 1.5 years Operating frequency 868 Mhz Wireless protocol WM-BUS WM-Bus manufacturer ID Power consumption Less than 0.1 W Dimensions (W x H x D) 75 ×... -
Page 19: Spare Parts
Longo programmable controller LPC-2.WP1H 7 SPARE PARTS For ordering spare parts following Part Numbers should be used: LPC-2.WP1H T/RH control panel LPC-2.WP1H P/N: 225WP112001001 Programming cable SMB P/N: 203SMB14001001 LPC-2.WA1 wireless adapter LPC-2.WA1 P/N: 225WA112001001 Interconnection cable ICM-x P/N: 203ICMxxxxxxxx... -
Page 20: Changes
Longo programmable controller LPC-2.WP1H 8 CHANGES The following table describes all the changes to the document. Date Description 15.01.17 Technical data update. 30.08.16 General update. 01.12.14 The initial version, issued as LPC-2.WP1 User Manual. -
Page 21: Notes
Longo programmable controller LPC-2.WP1H 9 NOTES...
Need help?
Do you have a question about the LONGO LPC-2 and is the answer not in the manual?
Questions and answers