Playing Tracks Repeatedly - Sony D-365 Operating Instructions

To Press
^
Pause (main unit
only)
^
Resume play after
pause (main unit
only)
= (= side of
Find the beginning
( on the remote
of the current track
(AMS*) control) once**
= (= side of
Find the beginning
() repeatedly**
of previous tracks
(AMS)
+ (+ side of
Find the beginning
() once**
of the next track
(AMS)
+ (+ side of
Find the beginning
() repeatedly**
of succeeding
tracks (AMS)
Go forward Hold down
+ (+ side of
quickly
() **
Go backwards Hold down
= (= side of
quickly
() **
*AMS = Automatic Music Sensor
**These operations are possible during both
play and pause.
To remove the CD
Remove the CD while pressing the pivot.
Notes on controlling the volume with
the remote control
Set the VOL (volume) control on the remote
control to MAX. Then adjust the volume on
the Discman to the level that you want to be
the maximum volume of the remote control.
Notes on display
• When you press ^ or ( (when RESUME
is set to OFF), the total number of tracks in
the CD and the total playing time appear for
about 2 seconds.
• During play, the track number and the
elapsed playing time of the current track
appear.
• During pause, the elapsed playing time
flashes in the display.
• Between tracks, the time to the beginning of
the next track will appear with the "–"
indication.
Notes on handling CDs
• To keep the CD clean, handle it by its edge.
Do not touch the surface.
• Do not stick paper or tape onto the CD.
• Do not expose the CD to direct sunlight or
heat sources such as hot air ducts. Do not
leave the CD in a car parked under direct
sunlight.
Not these ways
zOther Operations

Playing tracks repeatedly

(Repeat Play)
You can play tracks repeatedly in normal,
INTRO PGM, shuffle or RMS (Random Music
Sensor) play modes. Repeat all the tracks or
only one track.
REPEAT/
PLAY
MODE ENTER
To repeat all the tracks
Press REPEAT/ENTER during play.
The "REPEAT" indication appears.
To cancel repeat play, press REPEAT/ENTER
again.
To repeat a single track
1 Press REPEAT/ENTER while the track you
want to repeat is playing.
The "REPEAT" indication appears.
2 Press PLAY MODE repeatedly until "1"
appears.
To repeat another track, press = or + .
To cancel repeat play, press REPEAT/ENTER
again.
Playing only the tracks
you want
(INTRO PGM Play)
You can choose and play your favorite tracks
by scanning through the beginning of each
track in a CD.
+ ^
PLAY
REPEAT/
MODE ENTER
1
During play, press PLAY MODE
repeatedly until "INTRO PGM" flashes.
Flashing
2
Press ^ to start scanning .
The Discman plays the first 15 seconds of
each track and "INTRO PGM" flashes
faster.
3
Press REPEAT/ENTER while the track
you want is playing. To skip the track,
press + or just wait for the next track.
After you have gone through the CD,
"INTRO PGM" stops flashing and the tracks
you have chosen play automatically.
To finish programming before going through
the whole CD, press ^. The selected tracks
will be played.
To cancel INTRO PGM play, press PLAY
MODE repeatedly until no play mode is
indicated in the display.
Playing tracks in random
order
(Shuffle Play)
You can play the tracks in a CD in random
order.
PLAY
MODE
During play, press PLAY MODE repeatedly
until "SHUFFLE" appears.
The tracks play in random order.
To cancel shuffle play, press PLAY MODE
repeatedly until no play mode is indicated in
the display.
Note
• During shuffle play, you cannot return to
previous tracks by pressing = .
Playing tracks in the order
you want
(RMS play)
You can program up to 22 tracks to play in
any order you choose.
=/+
^
PLAY
REPEAT/
MODE
ENTER
1
During play, press PLAY MODE
repeatedly until "RMS" flashes.
Flashing
2
Press = or + to choose a track.
The track number and the playing order
appear.
Track number
Flashing
Playing order
3
Press REPEAT/ENTER to program the
track.
4
Repeat steps 2 and 3 to program the
remaining tracks.
5
Press ^ .
"RMS" stops flashing and the tracks you
have chosen play in the order you
specified.
To cancel RMS play, press PLAY MODE until
"RMS" disappears.
To check the program
During programming:
Press REPEAT/ENTER before step 5.
During RMS play:
Press PLAY MODE repeatedly until "RMS"
flashes, then press REPEAT/ENTER.
Each time you press REPEAT/ENTER, the
track number and the playing order appear in
the order you specified.
Note
• If you program another track after the 22nd
track, the first track programed is cleared and
the new track is programed instead.
D-365.3-858-168-2X.U.CA2.CED.CEH.E33.EA3.E92.AU2.JEW
Using other functions
To enjoy more powerful bass sound
You can enjoy a powerful bass-boosted sound.
Digital
MEGA BASS
Press Digital MEGA BASS to select BASS
or BASS . BASS is more effective.
Note
• If the sound is distorted when emphasizing
bass, turn down the volume.
To prevent sound from skipping
(ESP)
The ESP (Electronic Shock Protection)
function prevents the sound from skipping by
using a buffer memory that stores music data
for about 10 seconds. Use this function when
listening in a car or during a walk.
ESP
Press ESP.
The ESP indication appears.
Notes
• Playing may stop when the Discman gets a
strong shock even with the ESP function on.
• You may hear a noise or sound skip when:
— listening to a dirty or scratched CD,
— listening to an audio test CD or,
— the Discman receives continuous shock.
• Sound may drop for a while if you press ESP
during play.
• When you use an optical digital connecting
cord, the ESP function will be disabled.
To lock the buttons
You can lock your Discman against any
accidental operations. (You can still operate
the unit with the remote control.)
HOLD
Slide HOLD in the direction of the arrow.
When you press any button, "Hold" appears
in the display and you cannot operate the
unit.
To unlock, slide HOLD back.
To protect your hearing (AVLS)
The AVLS (Automatic Volume Limiter
System) function keeps down the maximum
volume to protect your ears.
NORM LIMIT
AVLS
(AUTO VOLUME LIMITER SYSTEM)
(rear)
Set AVLS to LIMIT.
The AVLS indication appears.
Note
• If the sound is distorted when you listen to the
bass-boosted sound with the AVLS function,
turn down the volume.
Continue to the reverse side m