Page 2
Original Instructions: English All rights reserved throughout the world. No part of this document may be stored in a retrieval system, transmitted, copied or reproduced in any way, including, but not limited to, photocopy, photograph, magnetic or other record without the prior agreement and permission in writing of the Vitec Group plc.
Page 3
Components and connections Titon LCD ................................... 8 Powertap® and USB ............................... 10...
Page 4
The Anton/Bauer Titon Series Lithium-ion battery is specifically designed and optimized to be charged with current Anton/Bauer chargers. The Titon battery Series are compatible with Anton/ Bauer chargers and have been tested on industry recognized competitive chargers as well. For...
Page 5
CAUTION! Weekly, or as needed - Clean the device, Keep batteries cool or at room temperatures whenever possible. Sustained associated components, and accessories as needed with a damp, non-saturated elevated temperatures are the primary reason cloth or paper towel. Do not wet the for premature failure of Lithium-Ion batteries.
Page 6
49CFR PARTS 100-185 Since the interpretation and application of regulations may vary with the aviation company, the transport of the Anton/Bauer Titon Series battery may be disallowed even when the conditions described above are satisfied. Anton/Bauer therefore strongly recommends that you consult with your transportation company prior to transporting the battery pack.
Page 7
All with Anton/Bauer’s balanced, high-quality cells that deliver a long mance and Performance Series chargers. For questions on product performance life. compatibility please contact the Anton/Bauer Customer Support Group. This user guide covers the safe and reliable operation of the Titon Series batteries. LP Performance Series Titon...
Page 8
Titon Series LCD Every Titon Series battery has an easy to read LCD which conveniently reports battery information in one of two ways. When the battery is sitting idle (no load is applied) the LCD will When the battery is powering an item (a load is applied), the LCD will show remaining capacity as percentage of full.
Page 9
The Titon Series features an Integrated PowerTap® and USB ports on the side of the battery to power camera accessories. PowerTap® allows for convenient deployment of up to 10 Amps of DC current for various parallel devices. The USB port supplies a regulated 5...
Page 10
Will deliver a high rate charge matched to the capabilities of the battery (typically a one or two Mount any Titon Series battery to any open position on an Anton/Bauer charger and hour rate, depending on battery type). During the charger will automatically determine the appropriate charge routine and execute it.
Page 13
This equipment has been tested and found to comply with the limits Operation of this equipment in a residential area is likely to cause harmful for a Class B digital device pursuant to Part 15 of the FCC Rules. interference in which case the user will be required to correct the These limits are designed to provide reasonable protection against interference at their own expense.
Page 14
This warranty for the product specified in this document (“Product”) Support Center or to the address above. Upon receipt of the Product is given by Vitec Production Solutions (“Anton/Bauer”), 14 Progress and a record of your compliance with the conditions of this warranty, Drive, Shelton, Connecticut 06484.
Need help?
Do you have a question about the Titon Series and is the answer not in the manual?
Questions and answers