Alcatel One Touch POP 4S 5095Y Service Manual page 19

L1 Service Manual
3) If the cell phone asks to input NCK code, which means it is SIM locked, and can only be worked with
dedicated SIM card. Use the correct SIM card.
4) Enter the phone code if necessary.
5) If power on, test step by step with the auto test code:
Press *#2886# in dial screen and then you will see the interface displaying the SW version. Select
―Auto‖ to start the auto test, or select ―MANU‖ to do the MMI test manually.
If one of the tests failed during ―Auto‖ test mode, it will show ―Failed: XXX‖, press ―Next‖ to go on test
and press ―END‖ to power off.

Traceability
I. You can get some information such as IMEI, CU-REF, PTH, Date Code, etc.
II. Press ―Pass‖ to continue.

Touch Panel1
I. ―Please draw on the yellow area‖ according to instructions;
II. Press ―Pass‖ to continue.

Touch Panel2
I. ―Please draw on the yellow area‖ according to instructions;
II. Press ―Pass‖ to continue.

LCD MIRE
I. You will see the LCD display three colors: RED, GREEN and BLUE if it functions well;
II. Press ―Pass‖ to continue;

LCD BLACK
I. You will see the LCD displays black if it functions well;
Rev.
1.0
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
ONE TOUCH 5095Y/K/ I Level 1 Service Manual
TCL
Communication Ltd.
Page
19/31