Download Print this page
Harman Kardon AVR 325 Instructions Manual
Harman Kardon AVR 325 Instructions Manual

Harman Kardon AVR 325 Instructions Manual

Rs-232 port instructions & code listing
Hide thumbs Also See for AVR 325:

Advertisement

Quick Links

H
K
AVR 325/AVR 525/AVR 7200
ARMAN
ARDON
RS-232 P
I
& C
L
ORT
NSTRUCTIONS
ODE
ISTING
V
1.1
ERSION
6-J
-2003
ANUARY

Advertisement

loading

Summary of Contents for Harman Kardon AVR 325

  • Page 1 AVR 325/AVR 525/AVR 7200 ARMAN ARDON RS-232 P & C NSTRUCTIONS ISTING ERSION -2003 ANUARY...
  • Page 2: What It Does

    Version 1.1 - Revised 6-Jan-2003 What it does Harman Kardon’s AVR 7200, AVR 525 and AVR 325 are designed for operation in conjunction with remote keypad, computer or other control devices capable of sending compatible hexadecimal data through an RS-232 connection. The commands issued by the control system or computer will mimic the operation of the standard remote control, and the AVR will respond accordingly.
  • Page 3 AVR 325/525/7200: RS-232 Port Instructions Version 1.1 - Revised 6-Jan-2003 Command Transmission Sequence Each command consists of a four byte hex command from the table attached to this document. To send a command, first find the hex code listed in the chart for the specific function.
  • Page 4: Command Sequences

    AVR 325/525/7200: RS-232 Port Instructions Version 1.1 - Revised 6-Jan-2003 The commands being sent through the RS-232 link are direct mirror images of the commands and command sequences that would be used if you were pressing the remote control buttons for the specific product. In cases where a main command is issued first, followed by up/down or left/right navigation to select a choice, you will need to use the specific directional commands for the command in use.
  • Page 5 AVR 325/525/7200: RS-232 Port Instructions Version 1.1 - Revised 6-Jan-2003 SING THE ABLE The code table that accompanies this document contains both the IR codes that may be used to program IR based systems as well as the binary and hex commands used to program an RS-232 system.
  • Page 6 RS-232 Codes for AVR 7200/525/325 Remote Command AVR Function RS-232 Command COMMENTS Power On Power On 80 70 C0 3F Power Off Power Off 80 70 9F 60 Mute Mute 80 70 C1 3E AVR Power On 80 70 C0 3F INPUT SEL 80 70 D0 2F INPUT SEL...

This manual is also suitable for:

Avr 525Avr 7200