PEUGEOT XS1P52QMI-3B Workshop Manual page 14

SPECIFIC POINT FOR OPERATION
- Remove the pins from the rockers using a 5 mm
screw (2).
- Remove the inlet (3) and exhaust (4) rockers.
- Remove the springs.
- Remove the camshaft (6).
- Make sure the rocker pins and rockers are not
worn (A).
- Turn the rollers of the rockers; they must turn
freely and silently (B).
- Make sure the cams on the camshaft are not
worn (C).
- Turn the ball bearings on the camshaft; they must
turn freely and silently (D).
12
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
4
2
6
ECH
A
A
C
D
3
B
A
A