Wall Mounting (Optional) - Prem-I-Air EH1681 Instruction Manual

WALL MOUNTING (OPTIONAL)

The fan should be wall mounted by a competent person.
The fan must be situated close to a mains socket, on a flat stable section of wall and clear of
any loose objects or curtains that may become drawn into the grille. The unit comes supplied
with screws and plugs designed for use with a solid masonry wall, if the fan is to be mounted
on any other surface then appropriate fixings should be purchased or a qualified person
should be employed to ensure correct fixing.
Fig 1
Distance 398mm
• Draw a level straight line on the wall and mark with 2 points (see fig. 1 for distance based on
the model you have purchased), the fan should only be mounted with the bracket horizontal
and not at an angle.
•
Drill the 2 holes using an appropriate drill for the plugs and screws that are to be used to
mount the fan. Insert and tighten the screws leaving a gap of 19mm to the wall
• Sit the fan on the screws and lower onto the key slots. Tighten the 2 screw to securely
fasten the fan to the wall.
• Adjust the fan as necessary.
The screws should be routinely inspected to ensure that they are tight and the fan has
not worked loose during use.
4 | P a g e