Description of parts
1. Front grill
2. Blade
3. Control panel
4. Carry handle
5. Tilt axis
6. Rear grill
7. Base
8. Remote control unit
Assembly & How to Operate
1.
Carefully remove the fan from the carton. Place the base flat on the floor.
2.
Install feet before operating the fan. Insert the front part of the feet first and then push
back until it snaps into place
3.
Plug the power cord into the socket.
4.
To operate the fan, touch the switch to reach the desired speed, Low(1), Med(2), High(3).
Using With the Remote Control
Open the cover at the bottom of the remote control and insert the batteries.(Not included)
OFF: To switch off the fan.
ON/SPEED: Allows to switch on and set the speed.
TIMER: To set the working time: 1,2,4 or 7.5hrs
Adjust the fan to your desired angle by moving the head up or down.
3 |
P a g e