Product Overview; Initial Inspection; Using The Probe - Cal Test Electronics CT2700 User Manual

Table of Contents

1 Introduction

1.1 Product Overview

The Cal Test CT2700 is a 40 kV High Voltage divider probe for use with

analog or digital multimeters.

1.2 Features

Measures up to: 40 kV (DC+Peak AC) or 28 kVrms AC.

Voltage dividing of 1000:1

Retractable sleeve 4 mm banana plugs

This probe is tested prior to shipment. It is therefore ready for

immediate use upon receipt. An initial physical inspection should be

made to ensure that no damage has been sustained during shipment.

After the inspection, verify the contents of the shipment. The kit

contains:

CT2700 high voltage probe

User manual

Standard probe tip

Hands-free hook probe tip

Bolt-on probe tip

Connect the red banana plug to the volts terminal and the

black banana plug to the COM terminal of your multimeter.

WARNING

Connect the CT2700's common lead (alligator clip) to earth ground or

reliable chassis ground before use. This ground connection is critical to

the safe operation of the probe. This connection must always be made

BEFORE the probe tip comes into contact with the high voltage and

must not be removed until after the probe tip has been removed from

the high voltage source.

800-572-1028

caltestelectronics.com

Table of Contents