Table of Contents
Advertisement
2 Product Description
Front Panel
4 mm Input
Safety Banana
Jacks
Power On/Off Indicator (Green)
Output BNC Connection
Figure 1 Front Panel Features
3 Using the Probe
Getting Started
1.
Connect the leads to the inputs on the probe.
2.
Connect the clips to the leads.
3.
Connect the probe to the oscilloscope with the BNC cable.
4.
Connect the probe to the mains adapter.
5.
Switch the probe from "OFF" to the desired attenuation ratio.
The power light should come on.
6.
Connect the clips to the circuit to be tested.
800-572-1028
Overload Indicator (Red)
Attenuation Function Switch
caltestelectronics.com
External Power
Connection
5
Advertisement
Table of Contents
