Advertisement
1. Connect the unit to the PC COM-port with an RS-232 cable or a USB-RS232 converter (the driver of
the converter needs to be installed).
2. Install the Profort PC Program in a computer with Windows by downloading the program from
www.profort.com. Start the program and type in the product key which can be found on the page.
3. Type in the number of the COM-port that the PC uses.
4. Fill in the rest of the information in the set-up program and finish with transferring it to the unit.
1. Install the Profort PC Program in a PC with Windows by downloading the program from
www.profort.com. Start the program and type in the product key which can be found on the page.
2. Mark 'Connection via the Internet' and choose a unique 'USERNAME'. You need the username to
log on
www.profort.com
3. Send following text messages to the unit:
(Notice: 1234 = password. Space counts as a character and is therefore important. Is the PIN code
deactivated, 1234 can be left out).
1234 EA USERNAME 99999999
If the phone operator is Telia, then also send following text to indicate APN for Telia:
1234 EG www.internet.mtelia.dk
Notice: The SIM card in the unit needs to be opened for GPRS at the telephone operator.
4. Fill in the rest of the information in the set-up program and finish with transferring it to the unit.
The unit has 2 default set-ups: The relay output is drawn for 10 seconds in case of alarm (G1) and
input 0 is set to connect/disconnect the unit with pulses (RP).
For further help: press F1 in the program; see the manual on the CD or on
p.
2
SET-UP
Set-up on PC via the PC COM-port
Set-up on PC via the Internet
and/or to activate the Internet access of the unit.
Default set-up
Define the username and phone
number of the unit.
APN for Telia
.
99999999 is the unit phone
number
www.profort.com
Version 1.02
Advertisement
