Reckeen ADB 100 Instruction Manual page 21

USER GUIDE |
You can adjust the sound in the range of -40 to +10 dB, where the 0 level (Analog In 1, Analog In 2)
corresponds to -10 dBV (-7.8 dBu or 0.316 V RMS) in the case of a consumer level, or 4dBu (1.78 dBV or
=1.23 volts RMS) in the case of a professional level analog inputs/outputs on ADB -100 panel. It depends
on audio level settings in Configuration Window: Audio Tab. Picture below.
Analog In 1 input on the XLR connector (left and right channel).Picture below.
Analog In 2 input on the XLR connector (left and right channel).Picture below.
Analog output 1 on the XLR connector (left and right channel).Picture below.
Analog output 2 on the XLR connector (left and right channel).Picture below.
21