Reckeen ADB 100 Instruction Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

INSTRUCTION MANUAL

ver. 1.3.0718

Table of Contents

Summary of Contents for Reckeen ADB 100

Page 1 INSTRUCTION MANUAL ver. 1.3.0718...
Page 2: Table Of Contents
Disclaimer of Product and Services ..................• Warnings and Precautions ......................• Warranty ............................... • ADB 100 is a professional audio standard in your Reckeen Studio! ......• AUDIO LINK Interface ........................• Connection ............................• Digital Inputs and outputs ......................
Page 3: Disclaimer Of Product And Services
Reckeen 3D STUDIO or LITE failure, or when the contents of a recording are lost or damaged as a result of your Reckeen 3D STUDIO or LITE failure or repair undertaken to your Reckeen 3D STUDIO or LITE . Reckeen will not restore, recover, or replicate the recorded or streamed contents made to your Reckeen 3D STUDIO or LITE , external recording media, or recording devices under any circumstances.
Page 4: Warnings And Precautions
Warnings and Precautions | USER GUIDE Warnings and Precautions 1. Read carefully all of these warnings and save them for later reference. Follow all warnings and instructions marked on this unit. 3. Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
Page 5: Warranty
It is likely that such data, software, or other materials will be lost or reformatted during service and Reckeen will not be responsible for any such damage or loss. Our warranty doesn’t cover damage caused by accidents or unauthorized modifications, installing any other software and repairs, misuse, sand, grit or water.
Page 6: Adb 100 Is A Professional Audio Standard In Your Reckeen Studio
| USER GUIDE ADB 100 is a professional audio standard in your Reckeen Studio!
Page 7 ADB 100 module is designed for professional producers, yet it maintains a size of 1U and a price at a reasonable level. The device is equipped with professional inputs and connections with the highest AES / EBU signal quality (AES3), used mainly in studio technology.
Page 8 (-10dBV, or 4dBu) AES/EBU, (AES3) d i f f e r e n t i a l i n p u t , software integrated with dynamic and condenser the Reckeen Studio 3D & microphone input ¼" Lite application...
Page 9 6.3 mm Jack Headphone Streaming Microphone *SDI connectors only in Reckeen Studio version with HDMI-SDI card **Virtual LITE studio offers a Full HD resolution. By purchasing additional License Key, You can upgrade it to 3D Studio &LITE with 4K resolution.
Page 10: Audio Link Interface
| USER GUIDE AUDIO LINK Interface...
Page 11 (with a single RJ45 cable). This enables you to separate a recording studio from a closed and acoustically insulated director’s room in which the Reckeen Studio 3D or Lite station is installed. The sound transferred digitally from ADB 100 device through RJ 45 connector maintains the...
Page 12 | USER GUIDE If you connect an additional ADB-100 device to Audio Link connector, you can expand the Reckeen system adding additional inputs and outputs: • two digital inputs on XLR connector (AB Digital 1, AB Digital 2) • two analog inputs on XLR connector (AB Analog In 1 stereo, AB Analog In 2 stereo) •...
Page 13: Connection
USER GUIDE | Connection...
Page 14 | USER GUIDE First connect the power supply plug to the ABD 100 device power socket. Picture below. Bolt the locking screw. Picture below. Next connect the power supply unit to the electrical outlet. Picture below.
Page 15 USER GUIDE | Connect the ADB-100 to the system using Straight-through RJ45 communication cable. Picture below.
Page 16 Plug the end of the cable to the input / output card. Picture below. Plug the second end of the cable to the Audio Link Connector in ADB 100. Picture below. To turn the device on, hold the power button for 1 second (turn it off about 3 seconds).Picture below.
Page 17 USER GUIDE | In case the device is not connected, a ‘ADB-100’ graphics is displayed in the tab along with a message about a lack of communication with the device below it. Picture below. When all the cables are correctly connected and a power button on the ADB-100 device is pressed, then instead of graphics, an audio mixer for this device will be automatically displayed.
Page 18: Digital Inputs And Outputs
| USER GUIDE Digital Inputs and outputs...
Page 19 USER GUIDE | In case of digital inputs and outputs 0 level corresponds to -20dBFs. Digital In 1 input on the XLR connector. Picture below. Digital In 2 input on the XLR connector. Picture below. Digital output 1 on the XLR connector. Picture below. Digital output 2 on the XLR connector.
Page 20: Analog Inputs And Outputs
| USER GUIDE Analog inputs and outputs...
Page 21 USER GUIDE | You can adjust the sound in the range of -40 to +10 dB, where the 0 level (Analog In 1, Analog In 2) corresponds to -10 dBV (-7.8 dBu or 0.316 V RMS) in the case of a consumer level, or 4dBu (1.78 dBV or =1.23 volts RMS) in the case of a professional level analog inputs/outputs on ADB -100 panel.
Page 22 When you switch to the Phantom mode, you will be warned that a voltage of 48 V will be applied to the speech insert. A red LED lights up on the ADB 100. Warning ! It is recommended not to connect or disconnect a microphone to the ADB-100 during the time the red LED is lit up.
Page 23 USER GUIDE |...
Page 24: Adb-100 Specification
ADB-100 specification | USER GUIDE ADB-100 specification...
Page 25 USER GUIDE | ADB-100 specification 31.75...
Page 26 ADB-100 specification | USER GUIDE Audio Input • Digital inputs • 2 x AES/EBU • Analog • 4x XLR Four channels – professional balanced analogue audio differential input (-10dBV, or 4dBu) • Two type of microphones dynamic and condenser with +48V phantom power Audio Output •...
Page 27 DC 12V power adaptor USB stick with user manual Power cable Straight-trought RJ45 communication cable with lenght 1,5m Reckeen holder T4K-K1U-03-01 Fastening screw for the holder M4x6 Imbus, black finish Warning! The ADB100 uses RJ45 cable but does not use the LAN protocol.
Page 28 ADB-100 specification | USER GUIDE...
Page 29 © Copyright 2018 Reckeen. All rights reserved. ‘Reckeen’ is registered trademark. All other company and product names may be trade marks of their respective companies with which they are associated.