Install & Connect The Distribution (Indoor) Antennas - Uniden U60P 4G Instruction Manual

Table of Contents

Advertisement

Contact Tech Support at 1.800.215.7015 or email at support@unidencellular.com
LIGHTNING SURGE PROTECTOR
(sold separately)
The lightning surge protector can be installed indoors or outdoors. When
connecting outdoors, install the lightning surge protector inline between the signal
antenna (outdoor) and the coaxial cable. When connecting indoors, install the
lightning surge protector inline between the outdoor coaxial cable and the booster.
!
INSTALL THE DISTRIBUTION (INDOOR)
ANTENNA
Select the installation location of your supplied distribution (indoor) antenna
based on the following:
Dome omni directional antenna
Place in the center of the area where the signal needs to be amplified.
Panel directional antennae
Place in the outer perimeter of the area the signal needs to be amplified.
Whip omni directional antenna
Mount directly to the connector marked "indoor" on the cellular booster.
IMPORTANT:
Lightning surge protector must be grounded.
Connect a ground wire to the appropriate place on the
lightning surge protector and connect the other end to a
verified ground source.
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

U65p 4gU70p 4g

Table of Contents