Uniden U60P 4G Instruction Manual page 11

Contact Tech Support at 1.800.215.7015 or email at support@unidencellular.com
BOOSTER – select location
1
Install the booster in an area that is protected from the
weather, properly ventilated and is away from excessive heat
and moisture.
SIGNAL ANTENNA (outdoor) - select location
2
Mount the signal (outdoor) antenna in an elevated outdoor
location so that it points towards the cellular tower and away from
where the inside antenna will be located.
3
OUTDOOR COAXIAL CABLE - select location
The outdoor coaxial cable is used to connect the signal
(outdoor) antenna to the booster.
4
INDOOR COAXIAL CABLE - (if used)
The indoor coaxial cable is used to connect the distribution
(indoor) antenna to the booster.
5 DISTRIBUTION ANTENNA (indoor)
The ideal location for the distribution antenna will be the area of your
property where you need to improve the signal most.
NOTE: The signal strength will be strongest closest to the antenna.
LIGHTNING SURGE PROTECTOR - (SOLD SEPARATELY)
6
The lightning surge protector connects in between the signal
antenna and the booster.
IMPORTANT: Lightning surge protector must be grounded.
7
COMMISSIONING THE SYSTEM
11