Safetec SDS-2/6 Additional Fault Finding Instructions page 18

Smoke Detection Panel SDS-2/6
"1"
Legend: Value for Setting the Rotary switch
Connect End-of-Line-Resistors ( 120 Ohm ) to Terminal 19/20 in Smoke Detection Panel and Extension Unit
Cablework for Interconnection
Configuration Table for Smoke Detection System SDS-2/6
safetec
without Extension Unit and without Repeater Panel
Detector
Interface
Indication-/Control Module
Module
"1" "6" "2"
Extension Unit SDS-E2/E6
Detector
Interface
Module
Setting equal to
No. of Lines
"2"
connected to this
Extension Unit
SDS01.100.83
Gez.: 28.07.97 kb