Technical Data - Macherey-Nagel Nanocolor Vario 4 User Manual

1.

Technical Data

NANOCOLOR VARIO 4:
®
NANOCOLOR VARIO C2: Programmable heating block for chemical-analytical diges-
®
Display:
Operation:
Temperature range:
Temperatures:
Temperature stability:
Warm-up time:
Heating times:
Time range:
Safety:
Interface:
Update:
Power supply:
Power consumption:
Dimensions:
Weight:
Marking:
Warranty:
Declaration of conformity:
These instruments conform to the following directives:
2006/95/EC – Low-Voltage Directive
2004/108/EC – EMV Directive
12
Programmable heating block for chemical-analytical diges-
tions with 2 independent heating units with 12 holes each for
test tubes with 16 mm outer diameter
tions with 12 holes for test tubes with 16 mm outer diameter
Coloured, backlit LCD touchscreen
Display menu guidance via touchscreen
40 – 160 °C (1 °C increments)
5 pre-programmed temperatures: 70 / 100 / 120 / 148 / 160 °C
7 free memory locations for individual temperature settings
± 1 °C (according to DIN, EN, ISO and EPA methods)
from 20 °C to 160 °C within 10 minutes
4 pre-programmed heating times: 30 min, 60 min, 120 min,
cont
8 free memory locations for individual time settings
0h:01min – 9h:59min (1 min increments)
Replaceable safety covers as contact protection
Lockable protective lids
Overheating protection
Bidirectional serial RS 232, USB A (master) and USB B (slave)
Allows connection of NANOCOLOR
(optional fully automatic calibration and preparation of test
certificates for instrument control and monitoring)
Via Internet and USB stick
110 – 230 V ~, 50 / 60 Hz
250 / 500 VA (NANOCOLOR
125 / 250 VA (NANOCOLOR
290 x 287 x 146 mm (NANOCOLOR
169 x 282 x 146 mm (NANOCOLOR
approx. 3.2 kg (NANOCOLOR
approx. 2.0 kg (NANOCOLOR
CE
2 years
T-Set (REF 919 917)
®
VARIO 4) or
®
VARIO C2)
®
VARIO 4) or
®
VARIO C2)
®
VARIO 4) or
®
VARIO C2)
®
www.mn-net.com