Sony CDX-C7850R Operating Instructions Manual page 28

Adding tracks to a programme
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
DISC TRACK
RLAY MODE
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display "P" above.
2
Press (2) (N) or (5) (n) to select the
track slot number where you want to
insert a track.
DISC TRACK
RLAY MODE
3
Push the SEEK/AMS control up or down
to select the track you want to insert.
4
Press (6) (ENTER) to enter the track.
The current track is inserted in that slot
number and the succeeding tracks shift
down.
To continue inserting tracks, repeat steps 2
through 4.
Note
When a 24 slots have been filled, "*Mem Full*"
appears in the display, and you cannot insert
more tracks.
5
When you finish inserting tracks, press
(4) (PLAY MODE) for two seconds.
6
Press (SHIFT).
28
ENTER
Track slot number
ENTER
Erasing tracks in a programme
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
DISC TRACK
RLAY MODE ENTER
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display "P" above.
2
Press (2) (N) or (5) (n) to select the
track you want to erase.
Track slot number
DISC TRACK
RLAY MODE ENTER
The track currently registered in slot 6.
3
Press (6) (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
DISC TRACK
RLAY MODE ENTER
µ
DISC TRACK
RLAY MODE ENTER
4
To continue erasing tracks, repeat steps
2 and 3.
5
When you finish erasing tracks, press (4)
(PLAY MODE) for two seconds.
6
Press (SHIFT).