Owl Calibration - ACR Systems OWL 100 Manual

32 OWL Data Loggers
The input source variables for the OWL logger are listed in the following table:
7.2

OWL Calibration

Calibrating a logger is the process of adjusting it so that its readings correlate to the values it
measures. Loggers are not calibrated at the factory.
If you want to calibrate the logger, click Calibrate to open the Calibrate dialog box.
Input source variable tables
Table 6-1: Input Source Variables for OWL Info Logger
Variable
Source0 Internal reading between 0 and 248
Source1 Time in seconds between data points
Source2 Zero calibration value
Source3 Span calibration value
Source4 Factory zero calibration value
Source5 Factory span calibration value
Source6 Range size
Source7 Range resistor
Figure 6.4
Description
© 2001 ... ACR Sy stems Inc.