Download Print this page

RC Lander F9F-2 Operational Manual page 2

Advertisement

Please read before operating this system!
W
Remarks:* We have two types EDF set for your selection.
e would like thank you for purchasing our new product—F9F-2, designed for the
hobby enthusiast. Base on its full - scale counterpart, this USA Jet can finish loops,
inverted flight and rolls and other aerobatics easily. Even the beginner can easily
setup the model and fly it stably. It is also made as a highly maneuverable model
for the intermediate to expert pilot. With the F9F-2 model which includes EDF set*,
speed controller, electric servo and landing gear with front steering (retract landing
gear & flap system are optional requirement) you will have joyful time in model
flying.
1) EDF68-1AP is standard equipment.
2) EDF68-1A is a higher grade EDF set which is an aluminum alloy material EDF
more powerful output, efficient and durability.
3)Please be noticed that all servo have been pre-set the center point before out of
factory. It maybe appeared some difference due to difference band mark radio
control. Kindly make sure to do the adjustment (special to pre-set the travel of
gear servo up to 130 %. If you select gear doors system with special
modified travel throw servos. You are needed to pre-set the travel of gear
servo up to 110-120%) with your own radio equipment before installation this jet
model.
4) From main wing edge to center 70-75mm is the CG point.
5) Please make sure to use a little piece of attached magic sticker for your LiPo
battery for fixing on the position before on flight.
- 2 -

Advertisement

loading

Related Products for RC Lander F9F-2