Inserting Cds - Sony CDP-M400CS Operating Instructions (CDPM400CS) Operating Instructions Manual

Changing the command mode of the player
1
Press MENU/NO.
2
Turn the JOG dial until "COMMAND MODE?"
appears in the display.
3
Push the JOG dial.
The current command mode appears.
2nd NEXT DISC ART. HIT TRACK GROUP
* C D 1 [ C D ] C 2
ALL 1 DISC S SHUFFLE REPEAT 1 GROUP
PROGRAM 1 2 3 X-FADE DELETE
MULTI CD TEXT
NO DELAY CD1 CD2 CD3
Current command mode
4
Turn the JOG dial to select CD1 or CD2, then push
the JOG dial again.
Note
The factory setting is CD1. The COMMAND MODE of the
remote commander is also set to CD1.You don't need to
change the setting.
MENU/NO
JOG
ART. MIN STEP SEC
D 3 *
COMMAND MODE
I / 1

Inserting CDs

You can insert up to 400 discs into this player.
OPEN/CLOSE
?/1
Top view of the disc slot
1
Press ?/1 to turn on the player.
2
Open the front cover by pressing OPEN/CLOSE.
3
Turn the JOG dial until you find the disc slot
where you want to insert a disc, while checking the
disc number (written beside every slot and also
indicated in the small display).
Disc slot at the loading position
Getting Started Getting Started
JOG
Playing position
Rotary table
Loading position
Small
display
Disc number
(continued)
US
7