Other Operations - Sony CDP-C5CS Operating Instructions (CDPC5CS) Operating Instructions Manual

Repeat Play Operations
You can play the CD tracks repeatedly in any
play modes.
To activate the Repeat Play function, press
REPEAT until "REPEAT' appears in the
display.
To
Repeat only one track
Cancel Repeat Play
When you are in the Repeat Play function, the
player repeats the tracks as follows:
When the disc is
played in
Continuous Play
(ALL DISCS)
Continuous Play
(1 DISC)
Shuffle Play
(ALL DISCS)
Shuffle Play
(1 DISC)
Program Play
(page 11)
8 US
Press REPEAT
Until "REPEAT 1" appears
while playing the track you
want to repeat.
Until "REPEAT" or
"REPEAT 1" disappears.
The player repeats
All the tracks on all discs
All the tracks on the current
disc
All the tracks on all discs in
random order
All the tracks on the current
disc in random order
The same program

Other Operations

To
Stop playback
Pause
Select a track
Select a track directly
Go to the next disc
Select a disc directly
Find a point in a track
Play tracks in random
order
Remove the CD
Adjust the volume
* When you directly locate a track numbered over 10,
press >10 first, then the corresponding number
buttons. To enter "0," use button 10.
Example: To play track number 30
Press >10 first, then 3 and 10.
Tips
• You can adjust the analog output level of the
amplifier with the ANALOG OUT LEVEL +/– on
the remote (page 5).
• When you reduce the analog output level, "FADE"
appears in the display.
• When you turn off the player, the analog output
level automatically returns to the maximum level.
• You can adjust the headphones volume on the
remote. To adjust the volume, connect the
headphones to the PHONES jack and adjust the
volume with the ANALOG OUT LEVEL +/– on
the remote.
• If there is no CD in the player, "no dISC" appears
in the display.
Do this
Press x.
Press X. Press X again or
H to resume play.
During play or pause, turn
lAMSL clockwise
(to go forward) or
counterclockwise (to go
backward)
(or press >( to go
forward) or . (to go
backward) on the remote.
Press the number button on
the remote.*
Press DISC SKIP.
Press DISC 1 – 5.
Press and hold M or m
during playback, and
release at the desired point.
Press PLAY MODE until
"SHUFFLE" appears in the
display.
Press AOPEN/CLOSE.
Press ANALOG OUT
LEVEL +/– on the remote.