Operation Manual – Device Management
H3C S9500 Series Routing Switches
Follow these steps to specify a file for the next device boot:
Specify a Boot ROM file
on a board
Caution:
The file for the next device boot must be saved under the root directory of the device
(for a device supporting storage device partition, the file must be saved on the first
partition). You can copy or move a file to change the path of it to the root directory.
1.2.3 Upgrading Boot ROM
During the operation of the device, you can use Boot ROM in the storage device to
upgrade those that are running on the device.
Follow these steps to upgrade Boot ROM:
Upgrade the Boot ROM
program on a board(s)
Note:
Restart the device to validate the upgraded Boot ROM.
1.2.4 Configuring a Detection Interval
When detecting an exception on a port, the operation, administration and maintenance
(OAM) module will automatically shut down the port. The device will detect the status of
the port when a detection interval elapses. If the port is still shut down, the device will
recover it.
If you change the detection interval at t to T1, the interval from t to the time when the
previous detection starts is T.
If T1<T, the interface which is down will be brought up immediately at t;
If T1>=T, the interface which is down will be brought up after T1-T time.
To do...
boot-loader file file-url
slot slot-number { main |
backup }
To do...
bootrom update file
file-url slot
slot-number-list
Use the command...
Use the command...
1-3
Chapter 1 Device Management
Remarks
Required
Available in user view.
Remarks
Required
Available in user view