22
ADDItIonAL FUnCtIons
Additional functions
Switching between Bluetooth® personal and shared mode
If the speakerphone is used as a
devices. In this setup the
If the speakerphone is used as a
In this setup the
shared Mode
device via Bluetooth.
Activating Personal mode
A
Press the Bluetooth and + button.
A voice prompt is announced.
After change of mode, the pairing list is cleared and you have to pair devices again (see page 7).
Waking up from standby
the speakerphone enters standby mode automatically after some time to save energy – depends on connection status,
activity etc.
z
z
z
While in standby the activity LeD is dimmed and all other
LeDs are off.
i
After a while in standby mode, the speakerphone turns off, if there are no active connections and not connected
to a power source.
SP 30 | SP 30 +
Bluetooth Speakerphone
personal device
Personal Mode
(default) should be used.
shared device
automatic connection to previously paired devices may not be desired.
should be used. In this mode pairing must be performed every time when connecting a
2s
it will automatically attempt to connect to the last eight paired
Activating Shared mode
B
Press the Bluetooth and – button.
A voice prompt is announced.
Press any button or plug in UsB to end the standby
mode.
2s