Using The Speakerphone; Turning The Speakerphone On/Off; Connecting Bluetooth® Devices - Sennheiser SP 30 User Manual

12

UsIng tHe sPeAkeRPHone

Using the Speakerphone

Turning the Speakerphone on/off

Turning the Speakerphone on
Press and hold the Power on/off button.
the LeD lights up white.
Connecting Bluetooth® devices
the speakerphone will by default attempt to connect to the two last connected Bluetooth devices. For further
information concerning personal/shared mode functionality see page 22.
Activate Bluetooth on the paired device(s).
If the Bluetooth LeD does not flash blue (automatic search
after switch-on):
Press the Bluetooth button to connect manually.
only two out of the maximum eight paired Bluetooth devices can be simultaneously connected to the
i
speakerphone.
i the search for paired devices will timeout if no devices are found. After this, connections must be established
manually on the paired Bluetooth device or by pressing the Bluetooth button on the speakerphone
SP 30 | SP 30 + Bluetooth Speakerphone
Turning the Speakerphone off
2s
Press and hold the Power on/off button.
the LeD flashes red 3 times and turns off.
All volume settings are saved automatically when the
speakerphone is turned off.
the LeD flashes blue while the speakerphone attempts
to connect to previously paired Bluetooth device(s).
once the connection is successfully established, the
LeD lights up blue.
3x
2s